Unlike many other sealants, Zorro Seal & Shield can bond to virtually any substrate. This high-performance coating is made with acrylic polymers designed for long-lasting and durable wear. It provides an ideal solution for a wide variety of problems commonly found in maintaining structures and helps reduce deterioration.
- Low VOC
- UV resistant
- Reduces deterioration
- Enhances preservation of substrate or surface
- Strengthens sealed materials
- Prevents staining and water damage
Surfaces must be clean, sound and free of any dirt, dust, grease and other contaminants. Wash with an acceptable cleaner and remove any existing mold or mildew with a mold and mildew cleaner or household bleach.
Net Contents 1 US gallon 13.7851. Blend one gallon of Zorro Seal & Shield with three gallons of water and mix thoroughly.
Apply with a garden sprayer or a backpack sprayer. For areas where overspray is not desired, use a roller or microfiber applicator.
Allow 24 hours before the coating is exposed to any water. Takes up to 7 days for the coating to reach full cure.
- Harmful if swallowed
- Can cause irreversible eye damage
- Do not use around food products
This product is toxic to fish and aquatic invertebrates. Do not discharge effluent containing this product into lakes, streams, ponds, ocean, estuaries unless in accordance with the requirements of a National Pollutant Discharge Elimination System permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without prior notification.
Do not contaminate food or feed by storage, disposal or cleaning of equipment. Do not allow this product to freeze, and keep container lightly sealed after use.
Triple rinse, then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by incineration.
CONSULT FEDERAL, STATE OR LOCAL AUTHORITIES FOR APPROVED ALTERNATE PROCEDURES.